© Bandstahlservice Schlag GmbH 2015
Service center for stainless steel strips, stainless precision steel strips and cold rolled steel as well as unhardened and hardened spring steel strips.
For special applications a normal, nearly burr free slit edges is not enough. Therefor we have a modern, custom-built edge processing machine which enables us to provide you several strip edges.
Tensile strenght: Thickness: Width:
von 350 - 750 N/mm² 0,400 mm - 1,000 mm 5,00   mm - 50,00 mm
slit edge (burr less than 10% of the material thickness) 			   deburred edge rolled edge rounded edge double-rounded edge
Tensile strenght: Thickness: Width:
von 800 - 2500 N/mm² 0,100 mm - 1,500 mm 4,00   mm - 50,00 mm
Thickness: Width:
0,350 mm - 2,000 mm 9,00   mm - 50,00 mm

Edge processing

Edge processing by rounding (Material removing) The strip edges get chipped by hard-metal plates. According to customers specification we can produce deburred, rounded and double-rounded edges.
Inner diameter of the original and finished coil  = 400 mm
Edge processing by rolling (Material forming) Certain materials don’t suit to a chipping process, especially softer materials. For these material we use an edge rolling machine with an integrated straitening.
Inner diameter original coil = 300 - 508 mm Inner diameter finished coil = 150 / 400 mm
Phone: +49 - (0)371 - 56159-0 // Fax: +49 - (0)371 - 56159-29  
For special applications a normal, nearly burr free slit edges is not enough. Therefor we have a modern, custom-built edge processing machine which enables us to provide you several strip edges.
Tensile strenght: Thickness: Width:
von 350 - 750 N/mm² 0,400 mm - 1,000 mm 5,00   mm - 50,00 mm
slit edge (burr less than 10% of the material thickness) 			   deburred edge rolled edge rounded edge double-rounded edge
Tensile strenght: Thickness: Width:
von 800 - 2500 N/mm² 0,100 mm - 1,500 mm 4,00   mm - 50,00 mm
Thickness: Width:
0,350 mm - 2,000 mm 9,00   mm - 50,00 mm

Edge processing

Edge processing by rounding (Material removing) The strip edges get chipped by hard-metal plates. According to customers specification we can produce deburred, rounded and double-rounded edges.
Inner diameter of the original and finished coil  = 400 mm
Edge processing by rolling (Material forming) Certain materials don’t suit to a chipping process, especially softer materials. For these material we use an edge rolling machine with an integrated straitening.
Inner diameter original coil = 300 - 508 mm Inner diameter finished coil = 150 / 400 mm
Tel: +49 - (0)371 - 56159-0 // Fax: +49 - (0)371 - 56159-29